Author Topic: safely removing the front slider windows  (Read 1252 times)

0 Members and 1 Guest are viewing this topic.

AmericasUltravanMuseum

  • Newbie
  • *
  • Posts: 5
  • Karma: +3/-0
    • View Profile
safely removing the front slider windows
« on: November 04, 2015, 02:37:14 AM »
Hi everyone!

 Remove the side panel(s) being careful not to twist or force as the panel will split/run without warning!
( We recommend carefully cutting this L shaped panel into two rectangles, for future removal/install.)

Remove the channel"fuzzies" from the channel around the edge of the glass, and you should be able to lift the glass up enough to clear the channel at the bottom.They may have a few screws or pop rivets holding these in place
 (sometimes there is an additional piece pop riveted in the channel that may have to be removed, as well as the surrounding trim pieces)

Doing the mod to the rib that stops the glass from opening wider, while the glass is removed, is a good idea.

hope this helps!